AH series: 2-axes Automatic and Y axis manual hand feed surface grinder. This series is affordable and easy to learn on and operate.
AHD series: 3 – Axes Automatic Surface Grinding Machine. Flange mount spindle provides not only high precision, strong regidity but maintenance free.
All major structures are casted with high quality grade iron which supply high stability , strong rigidity and high damping capacity.
Column machine is designed in double – layer type for higher rigidity, torsion resistance and high cutting efficiency.
Slide ways of X and Z axes are Turcite B coated with hand crapped to provide smooth and accurate movement and consistency.
Advanced hydraulic system with independent oil tank to prevent heat dissipation and vibration transmitted to the machine.
Easy-to-use control panel, located conveniently for user to operate quickly and easily.
Control panel: easily set up the operating cycles (cutting amount, infeed times) by pre-set system. The table would stop automatically after the cycle finish.
Electromangetic chuck would be equipped with a chuck control box, able to adjust clamping force upon load of parts and accuracy requirements. Rapid mode for Y axis is available, allow Y axis quickly move the tool to workpiece. Vertical feed (Y axis) 0.002 mm per graduation of hand wheel (AHD series).

SPECIFICATIONS

Specification	KGS – 250AH/ AHD	KGS – 1020AH/ AHD	KGS – 63AH/ AHD	KGS – 84AH/ AHD
Table working area (mm)	460×200	500×250	600×300	800×400
Longitudinal travel (mm)	540	560	710	910
Crossfeed travel (mm)	260	275	340	450
Distance from spindle center to table (mm)	475	475	600	600
Wheel dimension (mm)	180×13×31.75	180×25×31.75	355×38×127	355×38×127
Table load including magnetic chuck (kg)	100	250	420	700

Specification	KGS – 510AH/ AHD	KGS – 615AH/ AHD	KGS – 620AH/ AHD	KGS – 715AH/ AHD
Table working area (mm)	1000×500	1500×600	2000×600	1500×700
Longitudinal travel (mm)	1140	1600	2230	1600
Crossfeed travel (mm)	540	660	660	760
Distance from spindle center to table (mm)	575	600	600	600
Wheel dimension (mm)	355×38×127	355×50×127	355×50×127	355×50×127
Table load including magnetic chuck (kg)	1000	1300	1500	1400

Specification	KGS – 820AH/ AHD	KGS – 825AH/ AHD	KGS – 830AH/ AHD	KGS – 920AH/ AHD	KGS – 925AH/ AHD	KGS – 930AH/ AHD
Table working area (mm)	2000×800	2500×800	3000×800	2000×900	2500×900	3000×900
Longitudinal travel (mm)	2250	2750	3250	2250	2750	3250
Crossfeed travel (mm)	885	885	885	960	960	960
Distance from spindle center to table (mm)	880	880	880	880	880	880
Wheel dimension (mm)	508×50×127	508×50×127	508×50×127	508×50×127	508×50×127	508×50×127
Table load including magnetic chuck (kg)	2300	2800	3000	2300	2800	3000

STANDARD ACCESSORIES

	AH	AHD
1	Grinding wheel	Grinding wheel
2	Wheel balancing stand & arbor	Wheel balancing stand & arbor
3	Wheel flange & extractor	Wheel flange & extractor
4	Levelling pad & bolt	Levelling pad & bolt
5	Tool box & tools	Tool box & tools
6	Table splash guard	Table splash guard & Rear splash guard
7	Working lamp	Working lamp
8	Wheel dressing diamond tip & holder	Wheel dressing diamond tip & holder